GA-7VT600 SATA DRIVER

It will copy the driver to the floppy disk automatically. Any ideas or tips would be greatly appreciated. Turns out, my onboard SATA controller supports 1. Share this post Link to post Share on other sites. POSTing too also takes 2 minutes longer, all the while the Seagate drive generating this very strange noise — almost like crumbling paper, periodic ticks like a time clock, and a spring being coiled and released like those door propts behind doors near the bottom to prevent them from banging into the wall. I have the same exact problem when I added my new Seagate Left side, right side?

Uploader: Kijinn
Date Added: 25 January 2016
File Size: 19.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 28071
Price: Free* [*Free Regsitration Required]

Sign up for a new account in our community. Hopefully this works for you as I know, I have struggled through this problem as well: Ok thanks for the jumper settings.

I couldn’t get ga-7vt6000 running until I installed the raid drivers from the floppy that came with my motherboard. I have the same exact problem when I added my new Seagate If the drive is being detected in the BIOS we are making some progress at least. This is how the IDE Channels read:. I’m unable to use the BIOS any further and must reset.

Related Drivers  KODAK C813 DRIVER

GA-7VT (rev. ) | Motherboard – GIGABYTE Global

The drive does appear to be spinning and warm though. Linux and Windows – No Boot. I think Seagate says the ‘outer most pins. Could the drive be faulty?

Hi, I had the exact same problem. I warm rebooted again and finally they all were detected. Reply – Quote – Report Abuse. Click here to become a Hardware Analysis registered user.

Suspicious Activity Detected

Can you try it with just the hdd and no optical drives and see what happens? Want to enjoy fewer advertisements and more features? Did you find a solutioni have the same problem but the SW1 is set correctly to off. Posted October 25, When you boot from the CD and the Windows setup screen comes up, press “F6” to install the 3rd party driver and follow the instruction to install the OS. The SATA cable looks fine from motherboard to drive. Private Message – Add to Buddy List.

Turns out, my onboard SATA controller supports 1. Im new to all this so please stick with me. Jules is correct you must install drivers when installing the OS, you will find them on your motherboard disk, put to floppy drive and install when asked to.

Related Drivers  TTM57 DRIVER

Create an account or sign in to comment You need to be a member in order to leave a comment Create an account Sign up for a new account in our community. You need to prepare the RAID driver on the floppy disk.

Just built a new system for a friend. Life is too short, make the best of it! This is how the IDE Channels read: There are 0 registered and anonymous users currently online.

You need to be a member in order to leave a comment. Left side, right side? The GB Seagate Sign in with Twitter. Already have an account?